Single strand sprocket with one group of teeth around the circumference for applications in which a single chain can support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection on one aspect to accommodate various types of bushings to help prevent sprocket from slipping on the shaft
Sprocket teeth help prevent slipping and binding to avoid power loss in assemblies
This Tsubaki roller chain sprocket includes a 3/4-inch pitch, fits size 60 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It is a sort B sprocket with a hub projection encircling the bore on one side, and both hub and bore possess Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. The teeth of the sprocket assist in preventing slipping and binding in order to avoid power reduction in assemblies. It satisfies International Organization for Standardization (ISO) 9001 for quality assurance. This one strand roller chain sprocket is usually ideal for use in a wide range of applications involving light to moderate loads and ongoing, high-cycle operations, including automobile transmission systems, structure and agricultural gear, conveyors, and factory production and assembly lines, amongst others.
A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of 1 tooth to the next is named the pitch, and is often measured in 1/8-inch increments. The sprocket transfers power and motion by a roller chain that is threaded over the teeth of the sprocket. The alignment of the chain with the sprocket’s pitch helps prevent the chain from slipping so that no power is definitely lost. In the heart of the sprocket is the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is certainly often fitted to the sprocket’s hub to custom-suit the sprocket onto a shaft to hold it firmly set up. A hub is usually a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one part are Type B, and sprockets with no hubs are Type A sprockets. For applications needing sprockets to end up being swapped onto shafts of different diameters, a sprocket with a bore large enough to fit all shafts can be used, with the gap between your bore and shaft closed with a bushing or bearing. Roller chain sprockets are found in a broad selection of applications where the drive power of an engine needs to be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining tools, aeronautics, robotics and space exploration, amongst others.
U.S. Tsubaki Power Tranny manufactures a variety of chains, sprockets, and other power transmission components that meet International Organization for Standardization (ISO) standards for quality assurance. The business, founded in 1917, is certainly headquartered in Wheeling, IL.