0 Items

This Ruland setscrew shaft collar is made of aluminum. It is a setscrew-type shaft collar for applications helping low axial loads and basic positioning. Setscrew collars have improved keeping power when the shaft materials is softer than the setscrew material. It really is made of aluminum for level of resistance to corrosion and tarnishing and is certainly lightweight for use in applications where material weight is a consideration. This collar includes a forged setscrew for securing the collar onto the shaft. The operating temps for this collar range from -40 to 107 degrees C (-40 to 225 degrees F). This shaft collar is ideal for use in various applications, which includes in the auto industry to situate parts in vehicle power steering assemblies, the production industry to locate components on a conveyor belt program, and the hobby craft market to hold tires on axles in remote control vehicles, among others.
Shaft collars are ring-shaped devices mainly used to secure parts onto shafts. In addition they serve as locators, mechanical stops, and spacers between additional components. The two simple types of shaft collars are clamping (or split) collars, that can come in one- or two-piece styles, and setscrew collars. In both types, one or more screws hold the collars in place on the shaft. In setscrew collars, screws are tightened through the collar until they press directly against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-piece clamping collars must be installed by sliding the collar over the end of the shaft, while two-piece clamping collars separate into two halves and will be installed between components on the shaft. Shaft collars are produced from an array of materials including zinc-plated steel, aluminium, nylon, and neoprene. Found in nearly all sorts of machinery and industry, shaft collars are found in applications which includes gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical gear, and paper and metal mill equipment, among others.
Ruland manufactures shaft collars, rigid couplings, and zero-backlash motion control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The business, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization, and Restriction of Chemical substances (REACH) standards.
· Setscrew shaft collar for applications supporting low axial loads and simple positioning
· Effective on shafts made of softer material compared to the setscrew material
· Aluminium for resisting corrosion and tarnishing
· Includes a forged setscrew for securing the collar onto the shaft
· Operating temperatures range between -40 to 107 degrees C (-40 to 225 degrees F)

When you need to replace your existing flagpole flash collar this 2 piece collar makes installation easy. You don’t need to remove the pole or to go over the very best of the pole. This 2 piece cast aluminum collar includes a hidden hinge underneath the collar therefore no rivets or screws are because.
The heavy-duty 2 piece Cast Aluminum Collars may be the most durable collar offered on the market today! Cast from Aluminum Alloy, these 1/4″ heavy cast collars are designed to withstand the harshest of environments. alternative or addition to a preexisting flagpole.
I.D. around 1/8″ wider than Butt Diameter.
Aluminum Decorative Pipe Collar – 5 inch Fuel Type: Gas, Liquid Propane. Inner Diameter: 5″. Width: 10.625″. Double Wall Structure. UL Detailed. This Decorative Pipe Collar for 5 Inch Type B Pipe from the Round Gas Vent series is usually a sort B gas component and consists of the duralock system for a good seal. This pipe collar is an optional accessory. It really is to be utilized for decorative reasons. EPT Type B Gas Vent is made to meet the rugged needs of the work site. The inner wall structure is recessed to remove damage in handling. EPT’s innovative program for a lock-restricted connection for Type B Gas Vent called DuraLock. Start to see the alignment indicators satisfy; feel the ends grasp jointly; hear the snap as the bond firmly locks into place. Type B gas vents are not suitable for use with wood-burning or coal applications, commercial ovens, exhaust ranges and hoods, grease or pollution ducting, or as free-standing exhaust vents for temperature applications. Type B Gas Vent provides been engineered to heat up rapidly. It remains hot through the operation of the applying with reduced condensation in the applying and vent system. Pipe lengths are available in multiple lengths, 6 to 60 ins, with a full complement of adjustable and rigid fittings. Searching for Simpson Dura-Vent? You found it! Simpson Dura-Vent offers transformed their name to EPT. EPT is a recognized technological head in the venting sector. Consistently the first ever to market with new innovations in venting systems, EPT offers captured a leadership position in emerging markets. EPT offers patents for several products and continues to create safe and technologically advanced venting. The company’s research into solving problems with corrosion, when biofuels such as corn are used, resulted in the break-through patent for PelletVent Pro. Scientifically proven components and unequalled engineering make EPT products not only the best option, or safest choice, but the only choice for professional quality venting items.
When you require to displace your existing flagpole flash collar this 2 piece collar makes installation easy. No need to remove the pole or to go over the top of the pole. This 2 piece cast aluminum collar has a hidden hinge within the collar therefore no rivets or screws are because.
The heavy-duty 2 piece Cast Aluminum Collars may be the most durable collar offered on the market today! Cast from Aluminum Alloy, these 1/4″ thick cast collars are designed to withstand the harshest of conditions. replacement or addition to a preexisting flagpole.
Our spun aluminium flash collar is an ornamental covering that adds a finished look to the bottom of the flagpole. It also conceals and helps guard your floor sleeve from the elements. Prices shown below are for the standard bright satin complete. Our flash collars are also available in anodized and various other finishes upon demand. Please call for availability and pricing.
The Design B Spun Collar is our most popular style flash collar for shoe bottom flagpoles and is manufactured to exacting specs from the highest quality materials. This flash collar provides the perfect finishing touch for your flagpole. For Use With Shoe Foundation Flagpole Applications