EP-I-200 Hose Reel Irrigation Gearbox
The EP-I-200 is a colossal, industrial-grade agricultural transmission designed specifically for ultra-massive hard hose reel irrigation machines and water travelers. Featuring a high-torque 1:30 reduction ratio, GS400 ductile iron housing, and precision-ground gears, this extreme-torque agricultural irrigation machine speed reducer delivers the immense, continuous pulling power required to safely retract the heaviest water-filled PE pipes across massive commercial agricultural fields.
EP-I-200 Hose Reel Irrigation Gearbox
The EP-I-200 Hose Reel Irrigation Gearbox is a premium industrial-grade agricultural power transmission unit engineered and manufactured by Ever-Power in Singapore. The EP-I-200 combines cast iron G25 and GS400 materials, a highly efficient 1:30 speed-reduction gear ratio, and precision-ground gears. This results in superior continuous torque endurance, exceptionally smooth PE pipe rewind transmission, and extreme resistance to the relentless pulling forces required by modern mega-capacity heavy-duty traveler transmissions. Designed specifically to endure the constant, low-RPM extreme torsional loads of dragging multi-ton water-filled polyethylene (PE) pipes through deep, heavy mud, this incredibly robust 220 kilogram heavy-duty gearbox integrates high-precision reduction gears within a rigid ductile iron housing. Capable of supporting a standard input speed of 540 revolutions per minute (for PTO rapid rewind) or mating directly to high-flow turbine drive systems, it operates with a 1:30 speed-reducing ratio, delivering an ultra-high-torque output of 18 revolutions per minute to drive the largest massive hose drums efficiently. It delivers highly reliable power capacities reaching up to 149 kilowatts or 200 horsepower. The EP-I-200 serves as a direct, high-performance water traveler gearbox replacement for leading OEM brands in the agricultural irrigation sector, offering seamless dimensional compatibility, enhanced mechanical longevity, and significant reductions in expensive equipment downtime during critical watering cycles.
1.
Constructed utilizing a combination of high-grade G25 Cast Iron and superior GS400 Ductile Iron, providing unmatched structural rigidity to handle the immense radial loads generated by massive irrigation hose reel drums without housing fracture.
2.
Features advanced toothing technology specifically utilizing precision helical and bevel reduction gear profiles, ensuring optimized load distribution across the massive gear face, which is absolutely critical for providing smooth, continuous pulling torque without jerking or stretching the PE hose.
3.
Engineered as a high-performance agricultural irrigation machine speed reducer, utilizing a massive 1:30 ratio to convert a standard 540 RPM input into a slow, unstoppable 18 RPM output, delivering the extreme pulling force required for heavy-duty traveling gun sprinklers.
4.
Designed with an optimized thermal mass featuring a 6.5 liter internal extreme pressure gear oil capacity, which guarantees continuous, reliable cooling and lubrication to the heavy-duty tapered roller bearings during relentless 12 to 24-hour continuous irrigation runs.
5.
Built to safely manage massive continuous output torque loads reaching an astounding 68,000 Newton meters, efficiently transferring power to the drum to safely drag thousands of pounds of water and oversized pipe, featuring a highly robust output shaft designed for secure drum sprocket or massive ring gear mounting.
Product Overview and Value Proposition
In the highly demanding realm of global large-scale crop production, consistent and precise water application is the lifeblood of agricultural profitability. The ultimate reliability of an irrigation machine's mechanical power transmission system is the singular defining factor between a flourishing, high-yield crop and devastating drought stress. Ultra-extreme-duty hard hose travelers and traveling gun sprinklers operate on a simple but physically grueling principle: slowly retracting a massive, water-filled polyethylene (PE) pipe across hundreds of meters of muddy terrain. During these continuous, multi-hour irrigation cycles, the traveling gun sprinkler gearbox is subjected to relentless, immense torsional loads. The EP-I-200 Hose Reel Irrigation Gearbox is meticulously designed from the ground up by our dedicated engineering team at Ever-Power to proactively address the precise mechanical pain points experienced by massive commercial growers, municipal turf managers, and original equipment manufacturers worldwide looking for the most reliable irrigation equipment parts on the market.
When a massive hard hose traveler is actively irrigating, the gearbox must provide slow, uninterrupted, and absolutely steady rotational force. Even a minor mechanical shudder or inconsistent torque delivery from a lesser gearbox can cause the ultra-heavy PE pipe to stretch, deform, or violently snap under tension, resulting in thousands of dollars in ruined pipe, flooded fields, and days of lost watering time. Furthermore, these machines live outdoors in the mud, constantly exposed to high humidity, muddy water spray, and abrasive field dirt. Our uncompromising employment of thick-walled GS400 ductile iron ensures that the internal gear alignment remains absolutely rigid, actively preventing the catastrophic failure of bearings and the shearing of gear teeth under these extreme pulling conditions. The immense structural integrity and environmental sealing of the EP-I-200 guarantees that the precision-ground gears remain in perfect mesh, delivering the steady, unstoppable pulling power required for heavy-duty PE pipe rewind applications.
From a strategic procurement and long-term economic perspective, commercial agricultural equipment buyers are consistently searching for a highly reliable solution that successfully bridges the wide gap between the premium longevity of high-end Western brands and sensible, cost-effective capital investments. Ever-Power, operating directly out of our advanced manufacturing facilities in Singapore, delivers exactly this optimal balance. The EP-I-200 is not merely a replacement component; it is a comprehensive, industrial-grade large-scale agricultural fluid transport system solution that guarantees operational continuity during your most critical dry seasons. By strictly adhering to international manufacturing standards such as ISO and DIN, and ensuring seamless dimensional compatibility with existing traveler driveline systems, we entirely eliminate the engineering risks and fabrication costs typically associated with transitioning to a new supplier. The EP-I-200 stands as a testament to uncompromising engineering excellence, ensuring that your expensive extreme-torque irrigation hose reel drives run cooler, smoother, and significantly longer than ever before.
Comprehensive Technical Specifications
To actively facilitate precise engineering evaluation, seamless system integration, and informed B2B procurement decisions, the specific technical parameters of the EP-I-200 hose reel gearbox are detailed in the comprehensive table below. All specifications are derived directly from our stringent engineering tolerances and load testing protocols based on heavy industry standards.
| Ratio | Input RPM | Output RPM | Input Power Kw (HP) | Input Torque (N.m) | Output Torque (N.m) | Material | Toothing | Weight (KG) | Oil Cap. (LT) |
|---|---|---|---|---|---|---|---|---|---|
| 1:30 | 540 | 18 | 149 (200) | 2600 | 68000 | Ductile Iron GS400 / Cast Iron G25 | Helical / Bevel Reduction | 220 | 6.5 |
Data explicitly referenced from Ever-Power internal engineering documentation for the EP-I-200 series.
Material and Manufacturing Excellence
The fundamental mechanical strength, extreme continuous-duty durability, and exceptional environmental resistance of the EP-I-200 hard hose traveler transmission originate directly from our uncompromising approach to material science and advanced metallurgical processing at Ever-Power. Agricultural irrigation environments relentlessly expose sensitive heavy machinery to extremely high levels of water, thick mud, and continuous low-RPM stress. To aggressively combat this rapid physical degradation, the massive exterior housing is a specialized GS400 ductile iron shell, precision cast to withstand punishment. Ductile iron features carbon graphite in a nodular or spherical microscopic form, which actively halts the propagation of microscopic stress cracks deep within the molecular structure of the metal. This specific metallurgical advantage means the gearbox housing can easily absorb the severe, continuous radial loads of dragging multi-ton lengths of hose without fracturing.
Internally, the massive torque multiplication capacity heavily relies on premium gears cut using industry-leading manufacturing processes. We utilize a highly specialized reduction gear configuration for the EP-I-200 based on the immensely demanding high-torque application requirements of massive modern hard hose travelers. The helical and bevel gear teeth engage gradually and exceptionally smoothly, allowing for a fluid and continuous transition of rotational force. This progressive mechanical engagement completely eliminates the harsh mechanical backlash that causes PE pipe stretching. Every internal gear undergoes a highly precise carburizing and quenching heat treatment process. This advanced metallurgical procedure ensures that the outermost surface layer of the gear tooth achieves an exceptionally high hardness rating to actively resist wear over multi-day run times, while the inner core of the steel gear remains tough and highly ductile to safely absorb sudden resistance spikes from uneven, muddy field terrain.
The low-speed, extreme-torque internal shafts are machined from premium high-tensile alloy steel, precision ground to exact micrometric tolerances to ensure a perfect interference fit with the oversized, extreme-capacity tapered roller bearings. The output shaft is specifically engineered with a massive, robust profile to securely anchor the heavy chain sprockets or ring gears that drive the main reel drum under a staggering 68,000 N.m load. To seal the internal unit against the harsh, wet external environment, we strictly utilize industrial-grade, multi-lip oil seals reinforced with internal steel garter springs. This ensures that the critical 6.5 liters of internal extreme pressure gear oil remains perfectly contained while actively repelling highly abrasive mud, standing water, and agricultural dust.
Primary Application Scenarios
The highly engineered versatility, massive 1:30 reduction ratio, and incredibly robust 200 HP power rating of the EP-I-200 allows it to serve as the exceptionally dependable primary power distribution hub for ultra-extreme-duty irrigation equipment and agricultural fluid transport systems.
🔸 Mega-Capacity Hard Hose Reel Irrigation Machines
The primary application for the EP-I-200 is serving as the main drum drive unit on the world's largest, extreme-duty hard hose travelers. During the irrigation cycle, an integrated high-flow water turbine or heavy hydraulic motor provides a slow input to the gearbox, which uses its massive 1:30 reduction to slowly, steadily pull the ultra-heavy PE pipe and massive traveling gun sprinkler back to the reel. The EP-I-200 provides the smooth, unstoppable torque required to retract oversized hoses (up to 8-10 inches in diameter) across massive expanses of muddy terrain without jerking or damaging the pipe.
🔸 PTO Rapid Rewind Systems for Oversized Hoses
At the end of an irrigation run, or when the massive hose needs to be quickly retrieved without watering, the EP-I-200 acts as a high-capacity rapid rewind transmission. Powered directly by a heavy commercial agricultural tractor's 540 RPM PTO shaft, the gearbox efficiently handles the 200 HP input to quickly spool up the immense length of empty hose, significantly reducing labor time and equipment wear between massive field setups.
🔸 Industrial Slurry and Mega Liquid Manure Drag Hose Systems
In large-scale commercial livestock waste management, massive drag hose systems are used to pump millions of gallons of liquid manure directly into the field while the heavy tractor is in motion. The EP-I-200 provides the ultimate mechanical reliability for the reel mechanisms on these extreme slurry drag hose system transmissions, easily handling the severe, continuous weight of dragging thick, massive rubber slurry hoses through wet, deeply tilled soil over exceptionally long distances.
Compatibility and Direct Replacement Guide
Ever-Power strongly recognizes that a vast segment of the global agricultural market involves intelligently upgrading and replacing failed components on existing heavy machinery rather than purchasing entirely new, incredibly expensive implements. The EP-I-200 traveling gun sprinkler gearbox is meticulously engineered to serve as a seamless, direct drop-in replacement for many prominent North American and European brands, significantly reducing maintenance downtime during incredibly critical dry watering windows.
If your large-scale irrigation machinery requires a reliable water traveler gearbox replacement for 150-200 HP applications from manufacturers such as Bauer, RM Irrigation, Kifco, Cadman, or Ocmis, the EP-I-200 provides a highly attractive and extremely cost-effective upgrade path. We have perfectly matched the standard input shaft profiles, ensuring that your existing power drive shafts or heavy turbine linkages will connect flawlessly. The heavy-duty mounting bolt patterns and massive output shaft dimensions are designed to align exactly with standard implement frames and drum drive sprockets, completely eliminating the need for manufacturing massive adapter plates, drilling new holes, or welding.
Engineering Selection Guide
Selecting the absolutely correct technical specification of the EP-I-200 gearbox requires a careful, methodical evaluation of your specific traveler parameters and implement mechanical requirements to ensure safe, highly efficient, and incredibly long-lasting operation.
- First, you must accurately determine the required output torque and speed of your massive hose reel drum. The EP-I-200 is specifically engineered as an agricultural irrigation machine speed reducer. Because it is a 1:30 reduction unit, a standard 540 RPM PTO input will yield an 18 RPM output. Ensure that this output speed, combined with your drum's primary sprocket ratio, results in the correct PE pipe retraction speed (typically measured in meters per hour) for your required high-volume water application depth.
- Second, meticulously evaluate the continuous pulling load of your specific oversized hose. Ensure the combined weight of the fully extended massive PE pipe, the immense volume of water inside it, and the severe drag friction of the muddy field does not drastically exceed the continuous operational torque rating of the gearbox (68,000 N.m output). Overloading the gearbox by dragging oversized pipes through deep, sticky mud without proper tractor tire tracks will eventually overheat the unit and shear the internal gear teeth.
- Third, verify the freewheel and driveline protection mechanism. Hard hose travelers must be pulled out into the field by a heavy tractor before watering begins. The gearbox must either feature an internal disengagement (freewheel) lever or be connected to a robust heavy-duty clutch mechanism that decouples the massive drum from the gears. Pulling the hose out with the tractor while the gearbox is fully engaged will instantly destroy the internal gears due to massive, exponential back-driving forces.
Step by Step Installation Procedures
To guarantee the absolute reliability, safety, and warranty validity of your new EP-I-200 extreme-duty PE pipe rewind transmission, rigorous adherence to the following professional installation protocols is strictly mandatory for all maintenance personnel.
Preparation and Cleaning Phase
Begin by meticulously cleaning the heavy steel mounting carriage on the massive irrigation reel frame. Remove all rust, caked-on mud, and old flaking paint using an industrial wire brush. Even a tiny fraction of a millimeter of debris caught between the gearbox flange and the implement mounting deck will cause microscopic driveline misalignment and highly destructive radial stress on the bearings under 68,000 N.m of torque.
Positioning and Alignment
The EP-I-200 unit weighs an immense 220 kilograms. Proper lifting posture and a heavy-duty mechanical hoist or crane MUST be utilized to absolutely avoid severe injury. Carefully align the unit onto the reel carriage, linking the output shaft perfectly center to the massive drum chain sprocket or ring gear drive. Do not drop or force the gearbox into place, as this can severely damage the lower oil seal or bend the output shaft.
Fastening and Torque Protocol
Insert brand new high-tensile engineering grade bolts, minimum Class 10.9 specification, through the extreme-duty mounting flanges. Thread all bolts completely by hand, then use a recently calibrated heavy-duty torque wrench to tighten them progressively in a diagonal, crisscross pattern. Consult your implement manufacturer technical specifications for the exact required extreme-duty torque values.
Drive Sprocket Installation
Carefully align the massive chain sprocket onto the output shaft. Install the securing hardware and torque it to the implement manufacturer's specifications. Ensure the massive drive chain is tensioned correctly; an over-tightened chain will place devastating radial side-load on the gearbox output bearings, leading to rapid, premature failure and blown seals under massive load.
Lubrication Commissioning Procedures
The EP-I-200 is shipped completely dry without any fluid to comply with shipping regulations. Operating this massive gearbox for even one minute without gear oil will cause catastrophic friction failure. Completely remove the top breather plug and carefully fill the gearbox with exactly 6.5 liters of premium SAE 90 EP (Extreme Pressure) gear oil. Confirm the correct fluid level using the designated side check plug.
Preventative Maintenance and Lubrication
The operational longevity and mechanical reliability of the EP-I-200 agricultural irrigation transmission is directly proportional to the quality and strict frequency of the preventative maintenance it receives in the harsh, highly muddy commercial field environment.
Initial Break-In Oil Replacement
During the first 50 hours of active pulling operation, the newly machined massive high-torque reduction gear teeth undergo a natural microscopic polishing process. This safely sheds microscopic steel particles directly into the gear oil. You must drain and entirely replace the initial 6.5 liters of SAE 90 EP oil after exactly 50 hours of use. Perform this crucial oil change immediately after operating the machinery, while the oil is highly heated and thin to flush all impurities.
Routine Seasonal Lubrication Schedule
Following the initial 50-hour break-in period, the extreme pressure gear oil must be replaced every 500 operating hours, or at the very end of every intense watering season. Continuous exposure to outdoor humidity, heavy rain, and high-pressure washing causes condensation to form naturally inside the sealed cast iron housing. Over time, this water degrades the extreme pressure chemical properties of the oil and causes destructive internal rust.
Breather Valve Maintenance
The top oil fill plug incorporates a highly specialized mechanical breather valve. Immense internal friction generates significant heat over a 24-hour continuous run, causing air inside the massive casing to rapidly expand. If this tiny valve becomes clogged with dried mud or field dust, the internal air pressure will build continuously until it forcefully blows out the heavy-duty rubber oil seals. Clean the breather valve vigorously with compressed air every 40 operating hours. Ensure the gearbox is never fully submerged in standing field water or flooded ditches.
Advanced Troubleshooting Guide
Housing Overheating Diagnosis
The heavy cast iron housing should operate warm to the touch, generally remaining below a safe 85 degrees Celsius. If the unit is severely overheating and emitting smoke, immediately stop operations and check the internal oil level. Dangerously low oil causes extreme metal-on-metal friction. Furthermore, verify that the massive hose is not dragging over severe obstructions (like deep ruts, submerged boulders, or tangled on itself) which is spiking the pulling torque far beyond the 68,000 N.m safe limit.
Rhythmic Knocking or Jerking Rotation
A heavy, highly rhythmic knocking sound, or a jerking motion that violently shakes the heavy PE pipe, indicates severe internal mechanical trauma or a failing drive chain. If the drive chain is properly tensioned and fully lubricated, the noise from the gearbox is usually caused by a physically broken gear tooth resulting from a massive overload (e.g., the heavy sprinkler cart getting firmly stuck in deep mud while the gearbox continued pulling). This requires immediate cessation of all operation.
Drum Fails to Retract (Loss of Drive)
If the input shaft is turning via the heavy turbine or PTO but the output shaft is stationary, verify the condition of the internal freewheel/disengagement mechanism. If the gearbox is fully engaged but still not pulling, the internal shear pin (if equipped) has snapped, or the primary input gear has sheared completely off the shaft due to an extreme, sudden overload.
Oil Seal Leakage and Water Contamination
If oil is actively dripping from the massive output shaft, or if the oil appears milky/creamy (indicating severe water contamination), immediately check the top breather plug for blockage. If the plug is clear, meticulously inspect the output shaft area for tightly wrapped weeds, twine, or debris. Debris wrapped tightly around the sprocket hub will quickly cut directly through the heavy-duty rubber lip seal, causing total fluid loss and allowing muddy water to flood the internal gears.
Häufig gestellte Fragen
Why is upgrading to an extreme-duty PE pipe rewind gearbox important for massive commercial farms?
Massive commercial fields require exceptionally long, oversized PE pipes holding incredible volumes of water. Standard gearboxes simply cannot handle the exponential increase in drag friction and massive water weight over continuous 24-hour cycles. Upgrading to an ultra-extreme-duty unit like the EP-I-200 ensures you have the 68,000 N.m of torque necessary to pull the massive load smoothly without overheating or snapping gears, protecting your massive investment in irrigation equipment parts and PE piping.
What makes GS400 ductile iron superior to standard aluminum housings for an extreme-torque traveling gun sprinkler gearbox?
Standard aluminum housings suffer from exceptionally low tensile strength. Under the extreme, continuous radial and torsional loads of dragging a multi-ton water-filled pipe across a muddy field for hours on end, an aluminum housing will easily fatigue, warp, or crack at the mounting points. GS400 ductile iron provides massive structural rigidity and superior load-bearing properties, ensuring the heavy-duty traveler transmission survives extreme, relentless pulling conditions.
Why does this agricultural irrigation machine speed reducer utilize a 1:30 ratio instead of a 1:1 ratio?
Irrigation travelers require incredibly slow, steady, and immensely powerful rotation to slowly drag the oversized hose and properly distribute water without flooding or eroding the crops. A standard 540 RPM PTO input is far too fast and entirely lacks the torque to pull the hose. The 1:30 reduction ratio massively multiplies the torque while reducing the speed to a slow, deliberate 18 RPM.
Does the EP-I-200 gearbox come pre-filled with lubricating oil directly from the factory?
No. To strictly comply with complex international shipping and environmental regulations, all EP-I-200 units are shipped completely dry. You must manually add exactly 6.5 liters of premium SAE 90 EP gear oil prior to operating the massive traveler.
Can I safely use standard tractor hydraulic fluid in this extreme-torque gearbox?
Absolutely not. Tractor hydraulic fluid completely lacks the Extreme Pressure (EP) sulfur and phosphorus chemical additives required to protect heavy-duty gear teeth from destructive friction welding under massive 68,000 N.m low-speed, high-torque loads. You must use dedicated gear oil rated API GL-5, such as SAE 90 EP or 80W-90.
How do I safely pull the massive PE hose out into the field with my tractor?
You must completely disengage the gearbox from the reel drum before pulling the massive hose out with a heavy agricultural tractor. Most large irrigation machines feature a robust mechanical dog clutch or a freewheel lever on the gearbox itself. If you attempt to pull the hose out rapidly while the gearbox is engaged, the massive back-driving force will instantly shatter the internal reduction gears.
Will this gearbox directly replace the broken unit on my ultra-large Bauer or RM Irrigation hard hose traveler?
Yes, in most 200 HP class extreme-duty applications. The EP-I-200 is purposefully engineered to strict international dimensional standards. The mounting hole patterns, standard input shaft sizes, and massive output profiles are meticulously designed to seamlessly match standard high-capacity irrigation gearboxes found on popular commercial brands like Kifco, Cadman, Bauer, RM Irrigation, and Ocmis.
How tightly should I tension the massive drive chain connecting the gearbox to the drum?
The massive drive chain requires proper tensioning exactly according to the implement manufacturer's specifications. It is absolutely critical not to over-tighten the chain. An over-tightened chain places extreme, continuous radial side-load on the gearbox output shaft and bearings, which will cause the robust bearings to fail prematurely and the oil seals to blow out entirely under heavy loads.
How do I properly prepare the extreme-duty traveler gearbox for long-term winter storage?
Irrigation equipment often sits idle for months in freezing weather. At the very end of the watering season, thoroughly power-wash all mud off the heavy gearbox housing. Carefully drain the old gear oil while it is still warm to thoroughly remove suspended moisture (which can freeze and crack the cast iron housing). Fill the gearbox to the correct level with fresh SAE 90 EP oil. Liberally coat the exposed splined steel shafts and seals with heavy marine grade grease to absolutely prevent rust during the long winter off-season.
Why is exceptionally smooth gear engagement so critical for a massive PE pipe rewind transmission?
Any sudden jerking or mechanical backlash from poorly machined gears sends a violent shockwave down the ultra-heavy, water-filled polyethylene pipe. Over time, these continuous severe shocks cause the plastic pipe to stretch, thin out, and eventually burst. The precision-ground helical and bevel gears in the EP-I-200 provide the perfectly fluid, continuous torque delivery required to maximize the lifespan of your incredibly expensive PE hose.
Anti-Hallucination Notes
Please note that all specific dimensional parameters, weight specifications representing 220 kg, oil capacities requiring 6.5 L, and horsepower ratings reaching up to 200 HP provided in this highly technical document are subject to variations based on the exact ratio configuration and mounting style ultimately ordered. Agricultural irrigation applications are inherently subject to highly variable dynamic drag loads; therefore, peak output torque ratings of 68,000 N.m should never be treated as continuous safe operating limits without proper engineering oversight. Always consult the certified technical schematics and engineering standards like ISO, DIN, and ASABE provided by Ever-Power prior to final procurement and installation. The compatibility references to OEM brands indicate dimensional and performance equivalence for replacement purposes; the Ever-Power EP-I-200 is an independent, premium manufactured product.
Knowledge Graph Navigation
- Upper Concept: Agricultural Power Transmission Systems
- Lower Concepts: Tapered Roller Bearings, Speed Reduction Gearboxes, PTO Splined Shafts, Cast Iron Housings, Hard Hose Travelers, Heavy-Duty PE Pipe Rewind Mechanisms
- Related Products: Heavy-Duty PTO Drive Shafts, Flail Mower Gearboxes, Fertilizer Spreader Gearboxes
- Related Industry Applications: Large-Scale Agricultural Irrigation, Commercial Turf and Golf Course Watering, Slurry and Liquid Manure Management, Industrial Dust Suppression Systems
Contact Ever-Power
To request exact technical schematics, secure bulk pricing for OEM integration, or to verify drop-in compatibility for your specific extreme-duty traveling gun sprinkler or hard hose reel machine, please contact our Singapore engineering and sales team today.
Getriebereduzierer
Dank erstklassiger Fertigungskapazitäten, hochwertiger Materiallieferanten und eines hochmodernen Qualitätsprozesses kann EPT ein Höchstmaß an Präzision, Haltbarkeit und Beständigkeit bieten. Die EPT-Planetengetriebe sind für fortschrittliche Hochgeschwindigkeitsanwendungen mit geringem Verdrehspiel konzipiert und gebaut. Die EPT-Fertigungsverfahren ermöglichen es uns, außergewöhnliche Stoßbelastungen und verschiedene Montageoptionen anzubieten.
Oberflächenbehandlung
Glühen, natürliche Kanonisierung, Wärmebehandlung, Polieren, Vernickelung, Verchromung, Verzinkung, gelbe Passivierung, goldene Passivierung, satinierte, schwarz lackierte Oberfläche usw.
Verfahren
CNC-Bearbeitung, Stanzen, Drehen, Fräsen, Bohren, Schleifen, Räumen, Schweißen und Montage
QC & Zertifikat
Selbstkontrolle der Techniker in der Produktion, Endkontrolle vor der Verpackung durch einen professionellen Qualitätsinspektor
ISO9001:2008, ISO14001:2001, ISO/TS 16949:2009
Paket & Vorlaufzeit
Größe: Zeichnungen
Holzkiste/Container und Palette, oder nach kundenspezifischen Spezifikationen.
15-25 Tage Muster. 30-45 Tage offcial Bestellung
Hafen: Shanghai/Ningbo Hafen
FAQ
F: Sind Sie ein Handelsunternehmen oder ein Hersteller?
A: Unsere Gruppe besteht aus 3 Fabriken und 2 ausländischen Vertriebsgesellschaften.
F: Bieten Sie Muster an? Ist das kostenlos oder extra?
A: Ja, wir können das Muster kostenlos anbieten, zahlen aber nicht die Frachtkosten.
Q: Wie lang ist Ihre Lieferzeit? Wie lauten Ihre Zahlungsbedingungen?
A: In der Regel sind es 40-45 Tage. Die Zeit kann je nach Produkt und dem Grad der Anpassung variieren. Für Standardprodukte, ist die Zahlung: 30% T/T im Voraus, Restbetrag vor Versand.
Q: Was ist die genaue MOQ oder Preis für Ihr Produkt?
A: Als OEM-Unternehmen können wir unsere Produkte an eine Vielzahl von Bedürfnissen anpassen, daher können MOQ und Preis je nach Größe, Material und weiteren Spezifikationen stark variieren; zum Beispiel haben teure Produkte oder Standardprodukte normalerweise ein niedrigeres MOQ. Bitte kontaktieren Sie uns mit allen relevanten Details, um ein möglichst genaues Angebot zu erhalten.
DE 
EN 
ES 
RU 
FR 
PT 
JA 
AR 
IT 
ZH