0 Items

Worm Gear Speed Reducers: Double Reduction
Ever-Power. manufacturers double double reduction gear reducer Lowering Worm Gear reducers that are designed to last. Double reduction units are created with the same top quality components as the single decrease Worm Gear reducers.
Double Lowering Worm Gear Speed Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or stable shaft input
Mix of two single reduction reducers
Solid or hollow output shafts available
Several styles of bolt-on bases available
Substantial tensile strength cast bronze worm wheel and a hardened and surface alloy steel worm made integral with the shaft for very long and trouble-free life
All cast iron construction
9 Styles: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Lowering Worm Gear Swiftness Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day shipping on stock goods at no additional
cost
Twice reduction gearing mechanism is employed in huge machinery and automotives where in the speed has to be decreased at a required level. For eg if the suggestions speed is definitely 2000rpm and the output velocity desired is definitely 300rpm a reduction gearing device is used such as a reduction gear container. However in case of dual reduction mechanism, the reduced amount of speed occurs in 2 steps. At first the suggestions from the engine shaft has a pinion mounted on it through couplings. This pinion equipment is then linked to an intermediate gear which is first reduction gear. This gear is then connected to another low velocity pinion on another shaft. This low rate pinion is linked to the next reduction gear which is installed on the propeller shaft which may be the output.
Greaves Double Reduction Quickness Reducers are two stage worm reduction models. A specifically designed primary worm reduction unit is integrally installed on a typical single lowering Greaves worm reducer which forms the second stage. The composite units provide the most small and rigid arrangement for large reduction of speed necessary for sluggish shifting machinery. A wide range of ratios upto 4900:1 is available.
The wormshafts are made from top quality case hardening steeL accurately generated, ground and superfinished. The wormwheels include phosphor bronze centrifugally cast rims of considerable sections welded to rigid centres. Considerable versatility of shaft layout is certainly permissible with all types of Double Reduction units
Ever-Power Double Lowering Worm Gearboxes are two level worm reduction units.
A specially designed primary worm decrease unit is integrally mounted upon a standard single reduction AGNEE worm gearbox which forms the next stage. The composite models provide the most small and rigid arrangement for large reduced amount of speed necessary for slower shifting machinery. A broad range of ratios up to 4900:1 is available.
Double Decrease Worm Gear Container Sizes Available around are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed certainly are a typical selection of commonly used ratios from the entire range of Ever-Power Twice Reduction Worm Gear Box. Details of other ratios available on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Release / Shaft Mounted Version / All types with motor installation adaptor /
motor – optional
The worm shafts are constructed with high quality case hardening steel, accurately generated, ground and super finished. The worm wheels comprise of phosphor bronze centrifugally cast rims of considerable sections welded to rigid centers. Considerable flexibility of shaft layout is usually permissible with all types of Double Reduction products.
Product Description
The products are widely applied in the producing equipments of all sorts of industries domestic and overseas. They are the best choices for nowadays modern establishments of mechanical reducing drive control to know large twisting distance, significant gear ratio, low sound, high effectiveness and low temperature.
Description:
Customized top quality double worm gear rate reducer aluminium gearbox reduction gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or while customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Great Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, surface area harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Stuff, Ceramics, Chemical, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral