Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric motor, capacitor and quickness control change is still installed nevertheless the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for change type.)
T (See “Application Notice” below for make use of in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw even. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” electric fan motor china measured in one stud to the next).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you have a rotating knob and you have got a pull-chain). If you order several motor at a time, we will do our better to supply your order with each one sort of control or the additional.
Application Note: Do NOT use this electric engine in a nonfan app. This is a totally enclosed fan electric electric motor and made to have continuous ventilation over the motor casing for cooling. The casing isn’t vented and the electrical engine will overheat and get into automated thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans could also overload the motor and lead it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric motor is produced in China.