0 Items

Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with Electric Fan Motor grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric electric motor, capacitor and quickness control switch is still hooked up however the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for alter type.)
T (See “Application Notice” below for utilize in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw simple. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). These two types of switches both control the engine in the same way (but you have a rotating knob and you have got a pull-chain). If you order several motor at a time, we will do our better to supply your order with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan software. This is a totally enclosed fan electric electric motor and made to have constant ventilation over the engine casing for cooling. The casing isn’t vented and the electric engine will overheat and get into automatic thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the engine. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans could also overload the engine and cause it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade angle.)
Origin: This electric electric motor is produced in China.