0 Items

Energy UNITS FOR LIFT TABLE

Electrical power UNITS FOR LIFT TABLE one
Common Description
This power unit is built solely for the small lift table,Consisting of large pressure gear pump, AC motor, multi-functional manifold, valves, tank, and so on. This energy unit is broadly applied in the sector of logistic units for instance minifork lift, scissors lift and ariel doing work platforms. The lower-ing motion is controlled through the solenoid valve with the pace managed through the adjustable needle valve.
Energy UNITS FOR LIFT TABLE 2
Common Description
This power unit is developed exclusively for the medium lift table, Consisting of really effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The lowering motion is actived through the solenoid valve as well as speed controlled by the adjustable needle valve. When the lift rises to a large positoin, however the electrical power supply is cut, the lowering motion is controlled by the manual override perform.
Power UNITS FOR LIFT TABLE 3
General Description
This electrical power unit is created solely to the big lift table, Consisting of really effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The lowering motion is actived by the solenoid valve along with the speed controlled by a pressure compensated movement manage valve.
Electrical power UNITS FOR LIFT TABLE 4
Standard Description
This energy unit is made solely for the huge lift table, Consisting of remarkably effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The reducing motion is actived by the solenoid valve and the velocity managed from the adjustable needle valve. Once the lift rises to a substantial positoin, but the electrical power provide is reduce, the reducing motion is managed from the manual override function.
Particular Notes
one. This power unit is of S3 duty cycle, which can only perform intermittently and repeatedly, i.e. one minute on and 9 minutes off.
two. Clean each of the hydraulic parts concerned prior to installation of the electrical power unit.
3. Viscosity in the oil shoud be 15~46 cst,which should really also be clean and free of charge of impurities.N46 hydraulic oil is advisable.
four. Oil shifting is required soon after the initial 100 operation hrs,afterwards the moment every 3000 hrs.
five. The energy unit shown is made to be mounted vertically.

TAGs: