Pompe à vide

Vacuum pressure pump is a device that gets rid of gas molecules from a sealed volume in order to keep behind a partial vacuum. The 1st pompe à vide was created in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.

Vacuum Pumps, pressure pumps, cover a wide variety of operating pressures. Laboratory/filtration vacuum pumps are for make use of in the laboratory or anywhere a minimal vacuum is necessary; typically offer both vacuum and pressure capabilities. Use rough vacuum pumps (or roughing pumps) for laboratory and commercial applications requiring an even of vacuum significantly less than 10-3 Torr. Use high vacuum pressure pumps if you want vacuums greater than 10-3 Torr. Also, consider the free-air capacity needed (the bigger the free air capability, the faster it’ll evacuate the chamber) and whether you will need a lubricated (oiled) or non-lubricated (dry or oilless) pump. Lubricated pumps provide higher capacities, higher vacuum amounts, and lower sound, but can contaminate the system and require even more maintenance.

Pompes à vide industrielles
Vacuum Pumps
Our selection of industrial vacuum pumps includes oil-less and oil-flooded options. We are able to customize a pump to suit your specific needs and offer you with guidance with regards to choosing the right pump for you. You can expect high-quality, long-lasting results when you select Becker vacuum pumps.

100% Oil-less Vacuum Pumps
The Ever-power KVT3.60 – 3.140 series pumps are 100% oil-much less rotary vane vacuum pumps designed to operate on a continuing basis at any point from atmospheric pressure to vacuum pressure degree of 27” HgV (75 torr). These direct travel units are supplied with a high efficiency TEFC, C-encounter, flange mounted electric motor. Each of these pumps has an integral vacuum relief valve, a 5μ inlet filtration system, and vibration isolators as standard equipment.