0 Items

The EP Greenhouse Gearbox is a concise and lightweight reduction gearbox with an integrated limit switch system that is ideal for assembly of a locally available electric electric motor. The Gearbox is utilized in manually-controlled or climate-managed ventilation and display systems in greenhouses. The quick and easy-to-installEP Gearbox is usually rainproof and windproof. The Gearbox Gear motors for Greenhouse includes a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.

The low-noise Gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel tranny means that the drive shaft can be locked when the reduction gearbox is not running. The fully sealed reduction gearbox comes with an expansion chamber with a diaphragm to keep the gear oil at a low pressure under all situations, even at high temperature ranges. Thanks to the use of an expansion chamber, the Gearbox can be installed in any placement. There are no limitations, because there is no need for a bleed connect. The sealed reduction gearbox keeps the gear oil of the Gearbox in ideal condition for its entire operating life time. The Gearbox is suitable for discontinuous use, operating class s3-30%, with a maximum activation time of 25 minutes.

THE APPARATUS box reduction gearbox comes with an FT85 motor assembly flange, to which the right IEC standard motor can certainly be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed in an integrated chamber and is definitely enclosed by an impact-resistant plastic-type material cover. The limit change system is accessible and easy to adjust. The limit switch system’s maximum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The Gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of program of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).