The EP Greenhouse gear driver is a concise and lightweight reduction geared motor with an integrated limit switch system that’s ideal for assembly of a locally available electric electric motor. The reducer is used in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear reducer is rainproof and windproof. The gear reducer includes a high protection class (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel tranny ensures that the drive shaft is definitely locked when the decrease gearbox isn’t running. The fully sealed reduction geared motor has an expansion chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all circumstances, even at high temps. Thanks to the usage of an expansion chamber, the reducer could be installed in any placement. There are no restrictions, because there is no need for a bleed plug. The sealed reduction gear motor keeps the apparatus essential oil of the gear driver in ideal condition for its entire operating life time. The geared motor is suitable for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction geared motor comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed in an built-in chamber and is usually enclosed by an impact-resistant plastic material cover. The limit switch system is obtainable and easy to adjust. The limit change system’s optimum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear driver for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).