The EP Greenhouse gearbox is a compact and lightweight reduction reducer with a limit switch system that is ideal for assembly of a locally available electric electric motor. The gearbox is utilized in manually-controlled or climate-managed ventilation and display systems in greenhouses. The quick and easy-to-install EP gear driver is rainproof and windproof. The gearbox has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is definitely locked when the reduction gearbox isn’t running. The fully sealed reduction gear driver has an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all circumstances, even at high temps. Thanks to the usage of an growth chamber, the geared motor can be installed in any placement. There are no restrictions, because there is no dependence on a bleed connect. The sealed reduction reducer keeps the apparatus essential oil of the reducer in ideal condition for its entire operating lifetime. The geared motor is suitable for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction reducer comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can easily be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed within an built-in chamber and can be enclosed by an impact-resistant plastic-type material cover. The limit switch system is accessible and simple to adjust. The limit change system’s maximum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of program of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 moments.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).