0 Items

The EP Greenhouse geared motor is a compact and lightweight reduction gear driver with a built-in limit switch system that is ideal for assembly of a locally available electric electric motor. The gear motor can be used in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear reducer is rainproof and windproof. The gear motor has a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel tranny means that the drive shaft is locked when the reduction gear reducer isn’t running. The completely sealed reduction gear motor has an growth chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all situations, even at high temperatures. Thanks to the use of an expansion chamber, the gearbox can be installed in any position. There are no restrictions, because there is no need for a bleed plug. The sealed reduction reducer keeps the gear oil of the gear reducer in ideal condition for its entire operating lifetime. The reducer is suitable for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction gear motor comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed in an integrated chamber and can be enclosed by an impact-resistant plastic-type material cover. The limit switch system is obtainable and easy to adjust. The limit change system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear motor for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 moments.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).