A taper bush is an attachment device for a shaft. The bush’s taper surfaces are driven together by high-tensile screws, allowing it to firmly contract onto the shaft. This strong clamping force allows high torques to be transmitted. Therefore, it is often used for the attachment of large machine elements to a shaft. Listed below are some examples of how a taper bush can be used in your machine tools.
Taper bushes are a mechanical locking device. Typically used in power transmission drives, they are made of precision cast iron and are computer-etched to ensure a precise fit. High-tensile screws lock the taper part of the component to the hub, ensuring secure attachment and maximum torque. They are also useful for sprocket installation, and make alignment of these parts a breeze. This article explores the different types of taper bushes and their uses.
A taper bush is one of the simplest ways to fix a component to a shaft. These flangeless bushes are split and use screws to tighten. This design ensures a strong clamping force and makes them an excellent choice for mounting pulleys. Many applications require high torque, and this is where a taper bush comes in handy. When choosing a taper bushes, it is important to find the right one for your application.
Apart from standard bushings, taper-lock bushes can be used with parallel bore components. They can be installed with bolt-on or weld-on hubs. You can also use them with adaptors. This type of bushes is also used in pulley manufacturing, as it offers the simplest connection for the shaft hub. Apart from the benefits, these taper-lock bushes are also very low maintenance.
When replacing a bush, ensure that you clean it well. Clean it from both inside and out. Once cleaned, use a hammer to pound the bush against the large end. Do not use excessive force, as this may cause the bush to crack. When reinstalling a bush, check for any cracks in the bush before installing it. After ensuring that everything fits snugly, tighten all screws to the specified torque.
Another method for fabricating a taper bush is to profile the shaft of the machine. This can be accomplished cheaply by profiling the bush. The bush’s longitudinal slit can be made narrower or wider. This is also called local enlargement. You can also enlarge the bush’s slit by drilling a hole in its inner surface. Moreover, the keyway is made of the same material as the shaft, which helps to minimize the effects on balance.