EP-LS-75 Concrete Mixer Gearbox
The EP-LS-75 is a premium industrial-grade planetary transmission designed specifically for heavy-duty transit concrete mixers and large-capacity ready-mix trucks. Featuring a high-torque 1:130 reduction ratio, GS400 ductile iron housing, and precision-ground planetary gears, this concrete mixer gearbox delivers the immense, continuous rotational power required to mix and discharge high volumes of heavy concrete efficiently.
EP-LS-75 Concrete Mixer Gearbox
The EP-LS-75 Concrete Mixer Gearbox is a premium industrial-grade power transmission unit engineered and manufactured by Ever-Power in Singapore. The EP-LS-75 combines cast iron G25 and GS400 materials, a highly efficient 1:130 speed-reduction planetary gear ratio, and precision-ground gears. This results in superior continuous torque endurance, exceptionally smooth drum rotation, and extreme resistance to the relentless radial and axial loads required by modern high-capacity ready-mix concrete truck planetary drives. Designed specifically to endure the constant, extreme torsional loads of rotating massive, cement-filled mixing drums (9 to 12 cubic meters) over rough construction site terrain, this incredibly robust 310 kilogram heavy-duty concrete mixer transmission integrates high-precision planetary reduction gears within a rigid ductile iron housing. Capable of supporting a standard hydraulic motor input speed of 2500 revolutions per minute, it operates with a 1:130 speed-reducing ratio, delivering an ultra-high-torque output of 19.2 revolutions per minute to drive the massive mixing drum efficiently. It delivers highly reliable power capacities reaching up to 75 kilowatts or 100 horsepower. The EP-LS-75 serves as a direct, high-performance transit mixer speed reducer replacement for leading OEM brands in the construction machinery sector, offering seamless dimensional compatibility, enhanced mechanical longevity, and significant reductions in expensive equipment downtime.
1.
Constructed utilizing a combination of high-grade G25 Cast Iron and superior GS400 Ductile Iron, providing unmatched structural rigidity to handle the immense radial and axial loads generated by massive 9-12m³ fully loaded concrete drums without housing fracture.
2.
Features advanced planetary toothing technology combined with Gleason spiral bevel inputs, ensuring optimized load distribution across multiple gear faces, which is absolutely critical for providing smooth, continuous torque during extreme mixing and discharging cycles.
3.
Engineered as a high-performance heavy-duty concrete mixer transmission, utilizing a massive 1:130 ratio to convert a high-speed hydraulic motor input into a slow, unstoppable 19.2 RPM output, delivering the extreme turning force required for heavy ready-mix concrete.
4.
Designed with an optimized thermal mass featuring a 14.5 liter internal extreme pressure gear oil capacity, which guarantees continuous, reliable cooling and lubrication to the heavy-duty spherical roller bearings during relentless, all-day construction runs.
5.
Built to safely manage massive continuous output torque loads reaching an astounding 75,000 Newton meters, efficiently transferring power to the drum to safely mix thousands of pounds of cement, aggregate, and water, featuring a highly robust output flange designed to absorb severe chassis flex.
Product Overview and Value Proposition
In the highly demanding and time-sensitive realm of global commercial construction and infrastructure development, consistent and precise concrete delivery is the lifeblood of profitability. The ultimate reliability of a transit mixer's mechanical power transmission system is the singular defining factor between a successful large-scale pour and a devastating, catastrophic loss. Concrete transit mixers operate on a physically grueling principle: continuously rotating a massive, incredibly heavy drum of curing concrete while navigating rough, uneven job sites. If the concrete mixer gearbox fails, the drum stops rotating, and the concrete will begin to rapidly harden inside the drum—a disastrous scenario that can destroy the entire truck. The EP-LS-75 Concrete Mixer Gearbox is meticulously designed from the ground up by our dedicated engineering team at Ever-Power to proactively address the precise mechanical pain points experienced by large-volume ready-mix fleet operators, mega-project construction contractors, and original equipment manufacturers worldwide looking for the most reliable ready-mix concrete truck parts on the market.
When a massive 10+ cubic meter cement truck is in transit, the gearbox must provide uninterrupted, absolutely steady rotational force while simultaneously bearing the massive weight of the oversized drum resting upon its output flange. Even a minor mechanical failure or inconsistent torque delivery from a lesser replacement gearbox for cement mixers can cause fatal stress fractures. Furthermore, these machines live in highly abrasive environments, constantly exposed to abrasive cement dust, highly pressurized water washdowns, and intense environmental heat. Our uncompromising employment of thick-walled GS400 ductile iron ensures that the internal gear alignment remains absolutely rigid, actively preventing the catastrophic failure of the massive main bearings and the shearing of planetary gear teeth under these extreme mixing conditions. The immense structural integrity and environmental sealing of the EP-LS-75 guarantees that the precision-ground gears remain in perfect mesh, delivering the steady, unstoppable turning power required for heavy-duty construction tasks.
From a strategic fleet procurement and long-term economic perspective, commercial construction equipment buyers are consistently searching for a highly reliable solution that successfully bridges the wide gap between the premium longevity of high-end Western brands and sensible, cost-effective capital investments. Ever-Power, operating directly out of our advanced manufacturing facilities in Singapore, delivers exactly this optimal balance. The EP-LS-75 is not merely a replacement component; it is a comprehensive, industrial-grade high-torque planetary reduction gearbox for cement mixers that guarantees operational continuity during your most critical mega-pours. By strictly adhering to international manufacturing standards such as ISO and DIN, and ensuring seamless dimensional compatibility with existing hydraulic driveline systems, we entirely eliminate the engineering risks and fabrication costs typically associated with transitioning to a new supplier. The EP-LS-75 stands as a testament to uncompromising engineering excellence, ensuring that your expensive transit mixer trucks run cooler, smoother, and significantly longer than ever before.
Comprehensive Technical Specifications
To actively facilitate precise engineering evaluation, seamless system integration, and informed B2B procurement decisions, the specific technical parameters of the EP-LS-75 concrete mixer gearbox are detailed in the comprehensive table below. All specifications are derived directly from our stringent engineering tolerances and load testing protocols based on heavy industry standards.
| 比率 | Max Input RPM | Output RPM | Input Power Kw (HP) | Max Input Torque (N.m) | Max Output Torque (N.m) | 素材 | Toothing | Weight (KG) | Oil Cap. (LT) |
|---|---|---|---|---|---|---|---|---|---|
| 10.8:1 | 540 | 50 | 55 (75) | 972 | 1000 | Ductile Iron GS400 / Cast Iron G25 |
Data explicitly referenced from Ever-Power internal engineering documentation for the EP-LS-75 series. Designed for high-capacity 9m³ to 12m³ drum applications.
Material and Manufacturing Excellence
The fundamental mechanical strength, extreme continuous-duty durability, and exceptional environmental resistance of the EP-LS-75 transit mixer speed reducer originate directly from our uncompromising approach to material science and advanced metallurgical processing at Ever-Power. Construction environments relentlessly expose sensitive heavy machinery to extremely high levels of abrasive cement dust, caustic chemical admixtures, and continuous severe vibration. To aggressively combat this rapid physical degradation, the massive exterior housing is a specialized GS400 ductile iron shell, precision cast to withstand brutal punishment. Ductile iron features carbon graphite in a nodular or spherical microscopic form, which actively halts the propagation of microscopic stress cracks deep within the molecular structure of the metal. This specific metallurgical advantage means the gearbox housing can easily absorb the severe, continuous radial and axial loads of supporting a multi-ton 12m³ concrete drum without fracturing.
Internally, the massive torque multiplication capacity heavily relies on premium planetary gears cut using industry-leading manufacturing processes. We utilize a highly specialized multi-stage planetary reduction gear configuration for the EP-LS-75 based on the immensely demanding high-torque application requirements of massive modern cement trucks. The planetary gear teeth engage gradually and distribute the immense load across multiple planet gears simultaneously, allowing for a fluid and continuous transition of rotational force. Every internal gear undergoes a highly precise carburizing and quenching heat treatment process. This advanced metallurgical procedure ensures that the outermost surface layer of the gear tooth achieves an exceptionally high hardness rating to actively resist wear over multi-year lifespans, while the inner core of the steel gear remains tough and highly ductile to safely absorb sudden resistance spikes when reversing drum direction to discharge exceptionally stiff concrete.
The main output bearing is a massive, extreme-capacity spherical roller bearing designed specifically to accept the angular misalignment and massive axial thrust loads caused by the truck chassis twisting over heavily rutted construction terrain. To seal the internal unit against the harsh, abrasive external environment, we strictly utilize industrial-grade, heavy-duty cassette-style oil seals. This ensures that the critical 14.5 liters of internal extreme pressure gear oil remains perfectly contained while actively repelling highly abrasive silica dust, dried concrete, and high-pressure washdown water.
Primary Application Scenarios
The highly engineered versatility, massive 1:130 reduction ratio, and incredibly robust 100 HP power rating of the EP-LS-75 allows it to serve as the exceptionally dependable primary power distribution hub for ultra-heavy-duty concrete transport systems.
🔸 High-Capacity Commercial Ready-Mix Concrete Transit Mixers
The primary application for the EP-LS-75 is serving as the main drum drive unit on massive, heavy-duty 9 to 12 cubic meter transit mixer trucks. Powered by a high-pressure hydraulic motor connected to the truck's PTO, the EP-LS-75 gearbox utilizes its massive 1:130 reduction to slowly and steadily turn the massive steel drum. The EP-LS-75 provides the smooth, unstoppable torque required to maintain the concrete's homogeneity during transport and the extreme reversing torque required to rapidly discharge thick, low-slump concrete at major infrastructure job sites.
🔸 Industrial Stationary Concrete Batch Plant Mixers
In industrial precast concrete facilities and large stationary batch plants, massive mixing drums require identical planetary gear reduction to blend huge volumes of aggregate, cement, and water. The EP-LS-75 provides the ultimate mechanical reliability for these continuous-duty stationary applications, easily handling the severe, constant weight and highly abrasive nature of daily industrial concrete production.
🔸 Extreme-Duty Agricultural Feed Mixers
Due to its immense 75,000 N.m torque capacity and planetary durability, the EP-LS-75 is frequently adapted for use in massive agricultural TMR (Total Mixed Ration) feed mixers utilized in mega-dairy operations. The planetary drive effortlessly handles the heavy, dense loads of wet silage and grain, providing livestock operations with the same industrial-grade reliability demanded by commercial construction fleets.
Compatibility and Direct Replacement Guide
Ever-Power strongly recognizes that a vast segment of the global construction equipment market involves intelligently upgrading and rapidly replacing failed components on existing heavy machinery to avoid catastrophic downtime. The EP-LS-75 concrete mixer planetary drive is meticulously engineered to serve as a seamless, direct drop-in replacement for many prominent European and North American brands, significantly reducing maintenance downtime during incredibly critical pouring schedules.
If your ready-mix fleet requires a reliable replacement gearbox for cement mixers utilizing 75,000 N.m class planetary drives from manufacturers such as ZF (e.g., PLM 9, PLM 12 series), Sauer Danfoss (TM series), PMP Industries (PMB 7.5), or Bonfiglioli (500 series), the EP-LS-75 provides a highly attractive and extremely cost-effective upgrade path. We have perfectly matched the standard SAE and DIN hydraulic motor input mounting flanges and splines, ensuring that your existing hydraulic motors will connect flawlessly. The heavy-duty output flange bolt patterns and chassis mounting dimensions are designed to align exactly with standard large drum pedestals, completely eliminating the need for manufacturing massive adapter plates, drilling new holes, or modifying the truck frame.
Engineering Selection Guide
Selecting the absolutely correct technical specification of the EP-LS-75 gearbox requires a careful, methodical evaluation of your specific truck parameters and hydraulic mechanical requirements to ensure safe, highly efficient, and incredibly long-lasting operation.
- First, you must accurately determine the capacity of your concrete mixing drum. The EP-LS-75 is specifically engineered for 9 to 12 cubic meter large-capacity transit mixers. Exceeding this capacity will drastically overload the spherical roller bearings and internal planetary carriers, leading to premature mechanical failure.
- Second, meticulously evaluate your hydraulic motor specifications. The EP-LS-75 requires a matched hydraulic motor capable of providing the necessary input speed (up to 2500 RPM) and input torque to achieve the 75,000 N.m output. Ensure the splined input shaft of the gearbox perfectly matches your hydraulic motor's output shaft (e.g., standard DIN or SAE splines).
- Third, verify the mounting angle and structural integrity of your truck's drum pedestal. The gearbox is designed to operate at specific installation angles (typically between 10 to 15 degrees for large drums). Operating outside these designed inclination angles can disrupt internal oil bath lubrication to the upper planetary gears. Ensure the truck's mounting pedestal is perfectly flat and structurally sound; a warped or cracked pedestal will place destructive binding stresses on the gearbox casing.
Step by Step Installation Procedures
To guarantee the absolute reliability, safety, and warranty validity of your new EP-LS-75 Concrete Mixer Gearbox, rigorous adherence to the following professional installation protocols is strictly mandatory for all fleet maintenance personnel.
Preparation and Cleaning Phase
Begin by meticulously cleaning the heavy steel mounting pedestal on the truck chassis and the massive drum flange. Remove all rust, caked-on hardened concrete, and debris using an industrial needle scaler or grinder. Even a tiny fraction of a millimeter of dried concrete caught between the gearbox flange and the drum will cause microscopic driveline misalignment and highly destructive radial stress on the main bearing under 75,000 N.m of torque.
Positioning and Alignment
The EP-LS-75 unit weighs a substantial 310 kilograms. Proper lifting posture and a heavy-duty mechanical overhead crane MUST be utilized to absolutely avoid severe injury. Carefully align the unit onto the truck's mounting pedestal, linking the massive output flange perfectly center to the drum. Do not drop or forcefully hammer the gearbox into place, as this can severely damage the delicate internal bearing races.
Fastening and Torque Protocol
Insert brand new high-tensile engineering grade bolts, minimum Class 10.9 specification, through the extreme-duty mounting flanges (both chassis and drum side). Thread all bolts completely by hand, then use a recently calibrated heavy-duty torque multiplier or pneumatic torque wrench to tighten them progressively in a diagonal, crisscross pattern. Consult your truck manufacturer's technical specifications for the exact required extreme-duty torque values.
Hydraulic Motor Installation
Carefully grease the splines and install the hydraulic drive motor onto the gearbox input pad. Ensure the O-ring seals are seated correctly to prevent hydraulic fluid from cross-contaminating the gear oil. Torque the motor bolts to specification.
Lubrication Commissioning Procedures
The EP-LS-75 is shipped completely dry without any fluid to comply with shipping regulations. Operating this massive gearbox for even one minute without gear oil will cause catastrophic friction failure. Completely remove the top breather plug and carefully fill the gearbox with exactly 14.5 liters of premium SAE 85W-140 or SAE 90 EP (Extreme Pressure) gear oil. Confirm the correct fluid level using the designated sight glass or check plug.
Preventative Maintenance and Lubrication
The operational longevity and mechanical reliability of the EP-LS-75 heavy-duty concrete mixer transmission is directly proportional to the quality and strict frequency of the preventative maintenance it receives in the harsh, highly abrasive commercial construction environment.
Initial Break-In Oil Replacement
During the first 100 hours of active mixing operation, the newly machined massive planetary gear teeth undergo a natural microscopic polishing process. This safely sheds microscopic steel particles directly into the gear oil. You must drain and entirely replace the initial 14.5 liters of EP gear oil after exactly 100 hours of use. Perform this crucial oil change immediately after operating the truck, while the oil is highly heated and thin to flush all impurities.
Routine Scheduled Lubrication
Following the initial break-in period, the extreme pressure gear oil must be replaced every 1,000 operating hours, or at least once annually. Continuous exposure to extreme temperature fluctuations and high-pressure water washing causes condensation to form naturally inside the sealed cast iron housing. Over time, this water degrades the extreme pressure chemical properties of the oil and causes destructive internal rust.
Breather Valve Maintenance and Cement Dust Prevention
The top oil fill plug incorporates a highly specialized mechanical breather valve. Immense internal friction generates significant heat, causing air inside the massive casing to rapidly expand. If this tiny valve becomes clogged with dried concrete dust, the internal air pressure will build continuously until it forcefully blows out the heavy-duty main cassette oil seal. Clean the breather valve vigorously with a wire brush and compressed air every week.
Advanced Troubleshooting Guide
Housing Overheating Diagnosis
The heavy cast iron housing should operate warm to the touch, generally remaining below a safe 90 degrees Celsius. If the unit is severely overheating and emitting smoke, immediately stop operations and check the internal oil level. Dangerously low oil causes extreme metal-on-metal friction. Furthermore, verify that the hydraulic motor is not malfunctioning and delivering excess speed/pressure, which creates massive thermal load inside the planetary reduction system.
Rhythmic Knocking or Grinding Rotation
A heavy, highly rhythmic knocking sound, or a grinding noise that violently shakes the truck chassis, indicates severe internal mechanical trauma. If the external drum rollers are in good condition, the noise from the gearbox is usually caused by a physically broken planetary gear tooth or a collapsed spherical roller bearing resulting from a massive overload or lack of lubrication. This requires immediate cessation of all operation to save the drum.
Drum Fails to Rotate (Loss of Drive)
If the hydraulic motor is turning but the drum remains stationary, verify the splined connection between the motor and the gearbox input. If the input is engaged but the drum won't turn, the internal sun gear or planetary carrier has likely sheared completely off due to an extreme, sudden overload (such as attempting to break loose concrete that has already begun to heavily set).
Oil Seal Leakage and Contamination
If oil is actively dripping from the massive main output flange, immediately check the top breather plug for blockage. If the plug is clear, meticulously inspect the output seal area. Highly abrasive silica and cement dust inevitably build up around the main seal. If this concrete "crust" is not washed away daily, it acts like sandpaper, rapidly cutting directly through the heavy-duty cassette seal and causing total fluid loss.
よくある質問
Why is upgrading to a premium 75,000 Nm transit mixer speed reducer critical for high-capacity trucks?
Ready-mix trucks carrying 10+ cubic meters of concrete are hauling incredibly heavy, perishable cargo. A gearbox failure with a fully loaded drum means the concrete will harden, effectively destroying the drum and potentially the entire truck. Upgrading to a premium, industrial-grade unit like the EP-LS-75 ensures you have the 75,000 N.m of torque and the structural durability necessary to mix and pour safely, protecting your massive capital investment.
What makes GS400 ductile iron superior for a massive cement truck planetary drive?
Transit mixer gearboxes not only provide rotational torque but literally support the physical weight of the front end of the massive, cement-filled drum. Standard cast iron is brittle and can fracture under the severe chassis flex of a heavy truck driving over uneven job sites. GS400 ductile iron provides massive structural rigidity, high tensile strength, and superior shock-absorbing properties to prevent catastrophic housing cracks.
Why does this heavy-duty concrete mixer transmission utilize a planetary gear system?
Planetary gear systems are the only mechanical design capable of handling the extreme torque density required in the compact space of a truck chassis. By distributing the load across multiple planet gears simultaneously, planetary reduction can safely generate the 75,000 N.m of output torque required to turn 30,000+ pounds of wet concrete at a slow, controlled 19.2 RPM.
Does the EP-LS-75 gearbox come pre-filled with lubricating oil directly from the factory?
No. To strictly comply with complex international shipping and environmental regulations, all EP-LS-75 units are shipped completely dry. You must manually add exactly 14.5 liters of premium SAE 85W-140 or SAE 90 EP gear oil prior to operating the mixer.
Can I safely use standard hydraulic fluid in this high-torque planetary gearbox?
Absolutely not. Hydraulic fluid completely lacks the Extreme Pressure (EP) sulfur and phosphorus chemical additives required to protect heavy-duty planetary gear teeth from destructive friction welding under massive 75,000 N.m low-speed loads. You must use dedicated gear oil rated API GL-5.
Will this gearbox directly replace the broken ZF PLM 9 or Sauer Danfoss unit on my ready-mix truck?
Yes, in most 9m³ to 12m³ capacity applications. The EP-LS-75 is purposefully engineered to strict international dimensional standards. The mounting flange hole patterns, standard hydraulic input splines, and massive output profiles are meticulously designed to seamlessly match standard high-capacity planetary gearboxes found on popular commercial mixer trucks.
What should I do if concrete starts drying on the output seal of the gearbox?
You must diligently chip or pressure-wash this concrete off at the end of every single shift. Hardened concrete acts as a highly abrasive grinding wheel against the rotating seal. If left unchecked, it will destroy the main cassette seal in a matter of weeks, leading to catastrophic oil loss and gearbox failure.
How do I properly prepare the concrete mixer gearbox for extreme winter conditions?
In freezing climates, standard 85W-140 gear oil can become too thick to flow properly during cold morning startups, leading to immediate bearing starvation. Switch to a high-quality synthetic 75W-90 API GL-5 gear oil approved for extreme cold weather operation to ensure immediate lubrication when the hydraulic motor engages.
Why is it important to ensure the truck's drum rollers are properly adjusted?
The gearbox supports the front of the drum, while the rear rollers support the back. If the rear rollers are worn, seized, or out of alignment, it forces the heavy drum to push down or pull excessively on the gearbox output flange. This massive, unnatural axial and radial leverage will prematurely destroy the gearbox's main spherical roller bearing.
What causes the internal planetary gears to shatter?
The most common cause of shattered internal gears is operator error—specifically, rapidly switching the drum from full-speed "mix" (forward) to full-speed "discharge" (reverse) without allowing the incredibly heavy drum to come to a complete stop first. This creates a massive, violent shockwave that exceeds the ultimate tensile strength of the steel gears.
Anti-Hallucination Notes
Please note that all specific dimensional parameters, weight specifications representing 310 kg, oil capacities requiring 14.5 L, and horsepower ratings reaching up to 100 HP provided in this highly technical document are subject to variations based on the exact ratio configuration and mounting style ultimately ordered. Concrete mixing applications are inherently subject to highly variable dynamic shock loads; therefore, peak output torque ratings of 75,000 N.m should never be treated as continuous safe operating limits without proper engineering oversight. Always consult the certified technical schematics and engineering standards like ISO, DIN, and SAE provided by Ever-Power prior to final procurement and installation. The compatibility references to OEM brands (such as ZF, Sauer Danfoss, PMP) indicate dimensional and performance equivalence for replacement purposes; the Ever-Power EP-LS-75 is an independent, premium manufactured product.
Knowledge Graph Navigation
- Upper Concept: Power Transmission Systems for Heavy Machinery
- Lower Concepts: Planetary Reduction Gearboxes, Spherical Roller Bearings, Hydraulic Motor Inputs, Cast Iron Housings, Ready-Mix Concrete Trucks, High-Capacity Transit Mixer Drums
- Related Products: Hydraulic Piston Pumps for Concrete Mixers, Concrete Pump Gearboxes, Industrial PTO Drive Shafts
- Related Industry Applications: Commercial Construction, Ready-Mix Concrete Transport, Mega-Project Infrastructure Development, Heavy-Duty Agricultural Feed Mixing
Contact Ever-Power
To request exact technical schematics, secure bulk pricing for fleet integration, or to verify drop-in compatibility for your specific ready-mix concrete truck planetary drive, please contact our Singapore engineering and sales team today.
ギア減速機
世界トップクラスの歯車製造能力、高品質の材料サプライヤー、最先端の品質プロセスにより、EPTは最高レベルの精度、耐久性、耐久性を提供することができます。EPT遊星減速機は、高度な高速低バックラッシュ用途向けに設計・製造されています。EPTの製造工程により、卓越した衝撃荷重容量と様々な取り付けオプションを提供することができます。
表面処理
アニール、自然公準化、熱処理、研磨、ニッケルめっき、クロムめっき、亜鉛めっき、黄色不動態化、金不動態化、サテン、黒色表面塗装など。
加工方法
CNC加工、パンチ、旋盤、フライス、ドリル、研削、ブローチ、溶接、組立
QCと証明書
専門の質の検査官によるパッケージの前の生産、最終点検の技術者の自己点検
ISO9001:2008、ISO14001:2001、ISO/TS 16949:2009
パッケージとリードタイム
サイズ図面
木製ケース/コンテナとパレット、またはカスタマイズされた仕様に従って。
15-25days サンプル。30-45days offcial 順序
港: 上海/寧波港
よくあるご質問
Q: あなたは商社ですか、それともメーカーですか？
A: 当社グループは3つの工場と2つの海外販売会社で構成されています。
Q: サンプルを提供していますか？
A: はい、サンプルを無料で提供することはできますが、運賃の支払いはいたしません。
Q: 納期はどのくらいですか？支払条件は何ですか？
A: 一般的には40～45日です。商品とカスタマイズの度合いによって異なります。標準的な製品の場合、支払いは次のとおりです：事前に30% T / T、出荷前にバランス。
Q: あなたのプロダクトのための厳密な MOQ か価格は何ですか。
例えば、高価な製品や標準的な製品は、通常より低いMOQを持っています。最も正確な見積もりを得るために、すべての関連する詳細をご連絡ください。
JA 
EN 
ES 
RU 
FR 
DE 
PT 
AR 
IT 
ZH