Toothed belt プーリーs
We always look for a solution
We produce toothed belt pulleys the way you require.
特徴
· Unprocessed, preprocessed or fully processed
· Optionally available with suitable clamping element (Taper Lock System)
· Very wide variety of tooth designs (T, In, HTD,…) and pitches (imperial, 3M, 5M, 8M,…) available
· Low backlash toothing available
Usage of standard surface material
Consisting of 2 parts Printed timing belt tires profile HTD-3M for 9mm wide timing belts.
Allowing you to connect the encoder to the primary spindle. Almost any inside diameter 
is possible.Afterwards the encoder is linked 1:1 to the spindle by the same outer diameter. Additionally it is possible to print various other ratios if the space conditions make this necessary. In this instance you can adapt the encoder to ensure that the pulse price fits again afterwards.
Up to 150mm outside diameter are possible, the inside diameter can be produced according to your desires. The inside diameters are grated or turned out, so they are afterwards precisely made to measure.
Material: PETG, printed with an Ultimaker 2+
attachment:
Clamping fit with 3x M3 grub screws (arranged at an angle of 120°, pressed-in M3 nuts serve since thread)
or keyway (please specify desired dimension)
Important: Please indicate the approximate shaft dimension spindle shaft – encoder shaft, along with the desired shaft diameter spindle shaft and encoder shaft. These details can be entered by e-mail or in the comment field at the end of the order..
Factory Direct Raw-Edge Toothed V-Belts for Tractors, Harvesters
Product Details
Type and Size of Classical V Belt
| V-belt Type |
Top Width |
ピッチ Width |
Height | Length | Length Range | Length Range |
Reinforcement | Angle |
| Conversion | (inch) | (mm） | 体 | 40° | ||||
| O | 10 | 8.5 | 6 | lw=Li+25 | 15"-99" | 380-2514 | 7*4N*3 | 40° |
| あ | 13 | 11 | 8 | lw=Li+33 | 19"-163" | 480-4139 | 7*4N*3 | 40° |
| B | 17 | 14 | 11 | lw=Li+43 | 25"-360" | 630-9159 | 8*5N*3 | 40° |
| C | 22 | 19 | 14 | lw=Li+62 | 49"-479" | 1256-12160 | 9*9N*3 | 40° |
Type and Size of V Ribbed Belt/Poly V Belt
| タイプ | Rib Section | Angle of Rib | Belt Width | Belt Thickness | Rib Number | Length Range |
| 3PK | 3.56 | 40 | 10 | 4.8 | 3 | 500-5000mm |
| 4PK | 3.56 | 40 | 13.6 | 4.8 | 4 | 500-5000mm |
| 5PK | 3.56 | 40 | 17 | 4.8 | 5 | 500-5000mm |
| 6PK | 3.56 | 40 | 20.7 | 4.8 | 6 | 500-5000mm |
| 7PK | 3.56 | 40 | 24.3 | 4.8 | 7 | 500-5000mm |
| 8PK | 3.56 | 40 | 27.8 | 4.8 | 8 | 500-5000mm |
| 9PK | 3.56 | 40 | 31.4 | 4.8 | 9 | 500-5000mm |
| 10PK | 3.56 | 40 | 35 | 4.8 | 10 | 500-5000mm |
| 12PK | 3.56 | 40 | 42.5 | 4.8 | 12 | 500-5000mm |
| 15PK | 3.56 | 40 | 53 | 4.8 | 15 | 500-5000mm |
Structure of V ベルト
| Function | 素材 | |
| Tension Member |
The treated polyester cord is a low stretch high strength tension member able to withstand shock loads on drives with fixed centers |
Polyester/Aramid Fiber |
| Rubber Ribs |
Long wearing, oil resistant, fibre-loaded neoprene rubber is used in the ribs to provide support for the tension member and to transmit the loads to the pulley |
NR,CR,EPDM |
| Backing 素材 |
Bias ply type fabric backing resists cracking and provides abrasion resistance |
NR,CR,EPDM |
| Insulation 素材 |
oil and heat resistant rubber is used to bond the tension member to the rest of the belt |
NR,CR,EPDM |
関連製品
Work Place
Raw-Edge Toothed V-Belts for Harvesters, Buses and Trucks
Product Details
Type and Size of Classical V Belt
| V-belt Type |
Top Width |
ピッチ Width |
Height | Length | Length Range | Length Range |
Reinforcement | Angle |
| Conversion | (inch) | (mm） | 体 | 40° | ||||
| O | 10 | 8.5 | 6 | lw=Li+25 | 15"-99" | 380-2514 | 7*4N*3 | 40° |
| あ | 13 | 11 | 8 | lw=Li+33 | 19"-163" | 480-4139 | 7*4N*3 | 40° |
| B | 17 | 14 | 11 | lw=Li+43 | 25"-360" | 630-9159 | 8*5N*3 | 40° |
| C | 22 | 19 | 14 | lw=Li+62 | 49"-479" | 1256-12160 | 9*9N*3 | 40° |
Type and Size of V Ribbed Belt/Poly V Belt
| タイプ | Rib Section | Angle of Rib | Belt Width | Belt Thickness | Rib Number | Length Range |
| 3PK | 3.56 | 40 | 10 | 4.8 | 3 | 500-5000mm |
| 4PK | 3.56 | 40 | 13.6 | 4.8 | 4 | 500-5000mm |
| 5PK | 3.56 | 40 | 17 | 4.8 | 5 | 500-5000mm |
| 6PK | 3.56 | 40 | 20.7 | 4.8 | 6 | 500-5000mm |
| 7PK | 3.56 | 40 | 24.3 | 4.8 | 7 | 500-5000mm |
| 8PK | 3.56 | 40 | 27.8 | 4.8 | 8 | 500-5000mm |
| 9PK | 3.56 | 40 | 31.4 | 4.8 | 9 | 500-5000mm |
| 10PK | 3.56 | 40 | 35 | 4.8 | 10 | 500-5000mm |
| 12PK | 3.56 | 40 | 42.5 | 4.8 | 12 | 500-5000mm |
| 15PK | 3.56 | 40 | 53 | 4.8 | 15 | 500-5000mm |
Structure of V ベルト
| Function | 素材 | |
| Tension Member |
The treated polyester cord is a low stretch high strength tension member able to withstand shock loads on drives with fixed centers |
Polyester/Aramid Fiber |
| Rubber Ribs |
Long wearing, oil resistant, fibre-loaded neoprene rubber is used in the ribs to provide support for the tension member and to transmit the loads to the pulley |
NR,CR,EPDM |
| Backing 素材 |
Bias ply type fabric backing resists cracking and provides abrasion resistance |
NR,CR,EPDM |
| Insulation 素材 |
oil and heat resistant rubber is used to bond the tension member to the rest of the belt |
NR,CR,EPDM |
With high quality and competitive price
迅速な配達
顧客の要求によるパッキング。
We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.
Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.
JA 
EN 
ES 
RU 
FR 
DE 
PT 
AR 
IT 
ZH