Material Managing Electrical power UNIT two
This power unit characteristics electrical power up gravity down circuit. Activate the begin solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve with all the reducing pace managed from the stress compensated flow control valve. Goods of this series is usually widely used in the market of logistic units for example fork lift, mini lift table, and so on.
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic elements concerned prior to mounting the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which ought to also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
4. Oil modifying is required just after the first 100 operation hrs,afterwards as soon as each 3000 hrs.
5. The energy unit needs to be mounted horizontally.
Materials Managing Power UNIT one
This electrical power unit is intended for the fork lift market, consisting of hugely efficient gear pump, DC motor, guide raise and reduce valve, tank, ect. The up and down movement are managed through the lever on the guide release valve, which is equipped with an electric switch to activate the motor. The lowing pace is managed through the strain compensated movement manage valve.
one. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic parts concerned in advance of set up of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which should also be clean and absolutely free of impurities, N46 hydraulic oil is encouraged .
4. Oil shifting is needed after the original one hundred operation hrs, afterwards as soon as each 3000 hrs.
5. The power unit proven is made to be mounted horizontally.