This power unit attributes a permanent magnet motor using a electrical power up gravity down circuit. Activate the start out solenoid to start the motor to lift the machine. The lowing movement is activated from the solenoid valve together with the reducing speed controlled through the pressure compensated flow handle valve. Goods of this series can be broadly utilized in the field of logistic products this kind of as fork lift, mini lift table, and so on.
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean the many hydraulic parts concerned ahead of installation of the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which should also be clean and absolutely free of impurities. N46 hydraulic oil is suggested.
4. This electrical power unit is designed to be mounted vertically.
5. Check the oil degree during the tank immediately after the initial star of your energy unit.
six. Oil transforming is needed just after the first a hundred operation hours,afterwards the moment just about every 3000 hrs.
7. More pump sizes and tank sizes are avaiable upon request.
PALLET TRUCK Electrical power UNITS