0 Items

Hanging Pulleys for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the pressure of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Styles C, D, and J have a bracket on the bottom for tying off one end of a rope.
Style K reduce the force needed to hold your load set up. Unlike standard pulleys, these possess a V-groove for more grasp on your rope, and they ratchet when under load so they don’t slip in the additional direction. Pulley for3/8″ dia. rope can be arranged to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Aluminium and nylon are light-weight and corrosion resistant. Stainless has the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Acetal and aluminium are light-weight and corrosion resistant. Galvanized metal is certainly more corrosion resistant than iron and metal. Stainless steel may be the most corrosion resistant.
Easy-Open Hanging Pulleys for Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a totally free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Aluminum is more light-weight than stainless steel. Stainless steel is usually more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless steel may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about half the power of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Stainless steel is definitely more corrosion resistant than steel.
Hanging Pulleys meant for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and deal with systems. They require about half the pressure of a single-groove pulley to go the same load. They have a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Nylon is much lighter than metal. Aluminum can be corrosion resistant. Stainless steel may be the most corrosion resistant.
Pulley with carabiner may mount to steel framing or hang in your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end isn’t needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never use to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a set surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move an individual load, such as for example block and deal with systems.They are able to reduce the force needed to move the strain by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or items over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and deal with systems. They require about 50 % the force of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to convert than pulleys with out a bearing.
Style E pulleys have bracket upon the bottom that lets you tie off 1 end of your wire rope.
Warning: Never make use of to lift people or products over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a free rope end isn’t needed.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the drive of a single-groove pulley to move the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never make use of to lift people or items over people
Hanging Pulleys to get Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move a single load, such as for example block and deal with systems. They can reduce the force needed to move the strain by up to two times compared to single-groove pulleys.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Style A pulleys have a bracket on the bottom for tying off one end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a totally free rope end is not needed.
Warning: Never use to lift people or items over people.