rotary cutter gearbox

rotary cutter gearbox
RC-20 Series
Specs
Torque: one,750 – three,267 lb.-in.
198 – 369 Nm.
Ratios: 1:2.five, 1:2.eighty three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 16 oz. (.forty seven L)
Weight: 34 lbs. (15.4 kg)
Applications
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Collection
RC-thirty Sequence
Technical specs
Torque: two,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: 1:1.47, one:one.seventy one, 1:1.93
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Fat: 51 lbs. (23.1 kg)
Programs
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Collection
Requirements
Torque: 2,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.forty seven, 1:one.seventy one, 1:one.93
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.80 L)
Excess weight: 56 lbs. (twenty five.4 kg)
Programs
Rotary Cutters Rotary Slashers
Gears: Obtainable with both straight bevel or spiral bevel gearing.
Electrical power: Hp & Torque based on AGMA formulation for steady obligation additionally a service or load class element.
Shafting: Different dimensional, metallurgical, and heat-deal with alternatives offered.
Bearings: Geardrives obtainable with numerous bearing life options.
Lubrication: Drives available with numerous lubes relying on operating characteristics

Substitute Rotary Cutter gearbox, 40hp rated, one-3/eight”-6 spline enter shaft, 1.57″ X 12 tapered spline output shaft and 1:1.forty seven pace up ratio. These gearboxes have a sq. housing configuration and are equivalent in mounting and ratio to the spherical configuration gearboxes. These are first gear gearboxes on the IM402, IM502 and IM602 sequence rotary cutters which showcased slip clutch PTO shafts. This gearbox will not in shape the IM400, IM500 and IM60 types as they have a easy input shaft! If your gearbox has a twelve spline output shaft and a one-three/eight” – 6 spline input shaft this gearbox will operate. Bolt sample is four-three/4″ on heart hole to hole and 6-three/4″ center to middle of bolt hole on diagonal. The mounting holes kind a square bolt sample.

rotary cutter gearbox

Here are few even more short articles related to rotary cutter gearbox which may intrigue you.

en_USEN