Gear Containers For Rotary Cutter’s, Shredders, and Choppers
RC thirty Collection Gearbox, 40hp Rated, one-3/8″ SB enter, 1-one/two” X 12 Spline Output. 1:one.47 Ratio Replace your broken rotary cutter gearbox with this substitute unit. Why rebuild when you can replace at such a lower value? These gearboxes have been used by Worksaver, HawkLine, Global, WAC, Massive Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and many a lot more. Note: Genuine Gearbox may possibly have a rounded housing or square as shown, depending on recent availability, all inner components are interchangeable and requirements for both bins are equivalent! This gearbox functions a one:one.47 Pace Up equipment ratio for use on 5′ and more substantial diameter rotary cutters. Industry common one-three/8″ clean diameter enter shaft with one/two” shear bolt hole and retaining ring groove and 1.57″ diameter 12 tapered spline output shaft permit fitment to most light, standard and medium duty rotary cutters. Every single gearbox features substantial speed ball bearing units and heat handled gears and shafts to guarantee long daily life. 4 bolt mounting matches industry requirements. Each and every gearbox includes blade carrier mounting nut and cotter pin. Gearboxes are delivered dry and call for 16 ounces of 80-90W gearlube or equivalent. Disclaimer: Any and all First Gear Manufacturer’s (OEM) tradenames, logos, drawings, hues, descriptive info and part figures are used for parts identification reasons only, and DN Equipment, LLC (DN) is in no way implying that any particular components are OEM elements. More, any use of the OEM’s tradenames, trademarks, drawings or component quantities by DN is made only to assist DN’s buyers, in obtaining the appropriate DN portion or part which will exchange the OEM’s component.
rotary cutter gearbox
Gearboxes function to administer a transfer of velocity and torque by way of their inner equipment rotation, supporting the overall functionality of your rotary cutter. This RW-710-6S gearbox operates at seventy five-ninety HP. The housing is made from sturdy ductile iron and the enter shaft measures 1-3/8 in., with 6 splines. It has a gear ratio measuring one:one.forty six, and is created for use with 5 ft., 6 ft., and 7 ft. rotary cutters. Far more measurement and a lot more HP mode remember to make contact with us for information.