0 Items

All EPT shaft collars, including quick-clamping collars, are sole point faced to make sure perpendicularity and proper alignment. This critical manufacturing stage assures precise shaft collar face to bore relationship leading to correct aspect positioning on the shaft and actually pressure on interfaced parts.
Quick-clamping shaft Shaft Clamp collars from EPT are made from high quality light weight aluminum with type-II sulfuric anodized finishes, with a dark-colored finish on the collar and a gold finish on the clamping lever for added visibility. Aluminium collars are corrosion resilient, lighter than various other metals, have low inertia and have nonmagnetic properties. All EPT items will be RoHS and REACH compliant. Available normal sizes for the quick-clamping shaft collars will be 0.375” to 1 1.5” in the inch series and 8 mm to 38 mm in the metric series.
Shaft Collar, System of Measurement Inch, Shaft Locking Type – Couplings 1 Piece Quick Clamp, Bore Type – Collars Basic Bore, Bore Dia. 3/8 In., Materials – Collars Black Anodized 6061 Aluminum, External Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series STAINLESS, Operating Temp. Selection -40 Degrees to 200 Degrees F, Expectations RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is made of lightweight Aluminum, the two piece design allows you to install these collars anywhere on a shaft without removing components. In addition to reducing the entire weight, the flats let you rotate a shaft without marring or gouging the shaft. Merely place the collar on the shaft and tighten the two socket-head cap screws to secure the collar and a wrench and be positioned on the collar’s flats to rotate the entire shaft/collar assembly.
Made of lightweight Aluminum
Enables you to install these collars anywhere on a shaft without removing components
Simply place the collar upon the shaft and tighten both socket-head cap screws to secure the collar
Flats let you rotate a shaft without marring
Climax Part C-056-S Arranged Screw Collar is made with T303 STAINLESS, which is effective in corrosive environments. Sizes are 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It really is effective on hard and gentle shafts. It is a Cost effective collar design, and Easily installed where significant disassembly would otherwise be required.
EPT speedy clamping shaft collars collar clamp hinge purchase manufacturing 2 1 8 in steel,shaft collar clamp power manufacturing metal vex clamping style,vex clamping shaft collar collars one piece with lever clamp hinge,vex clamping shaft collar clamp 3d model production quick 1 3 8 in alum,EPT speedy clamping shaft collars collar clamp 2pc 1 in metal stainless split with lever,climax metal s shaft collar two piece clamp style EPT speedy clamping collars 2computer 1 in steel pressure,clamp upon shaft collars couplings universal clamping collar design and style with mounting holes 2pc 1 in metal,shaft collar clamp drive clamping calculation quick connect collars at best price in,clamp shaft collar clamping collars pressure calculation quick connect,stainless steel double split shaft collar with quick clamping clamp hinge force calculation.
Black Oxide Plated Steel One-Piece Clamping Collar.
Recessed Screw Head has an outside surface free of major projections for safety.
Design completely engages the shaft without marring.
Greater axial holding electrical power than arranged screw collars.
Effective on hard & soft shafts.
Indefinitely adjustable and simple to remove, one-piece clamping collars are typically applied to hard or very soft standard round shafts, more than a split hub or on thin wall tube. Through the use of friction to provide superior grip on bars and shafts, one split collars give sturdier, more dependable results when compared to the set screw design of solid collars. They also offer tremendous axial electricity, while reducing shaft distortion for top-notch performance and decreased deterioration.

The collar clamping mechanism works fast and proficiently with simple hand opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer area of the collar. The design of the cam on the lever and the mating machined surface area on the collar assure a good fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N depending on the collar bore size. In circumstances where higher holding vitality is definitely or clamp axial load is necessary, the quick-clamping collar is not the recommended decision. EPT offers a total type of industry-leading one-part and two-part shaft collars designed for these applications.