0 Items

The chain is situated at the external surface of the wheel, equal a belt, and one’s teeth stick beyond your chain. The chain grips with the wheel through the teeth that are located at the bottom of the chain. The chain teeth and the chain wheel teeth are therefore constituted that by wear at the linking elements the pitch improves, the chain accordingly tend to move out on the tooth areas, so to hold on a more substantial pitch diameter; the consequence of this move can be that the pitch of the chain and the pitch of the wheel enhance to the same degree.
The load on the teeth is divided across all the teeth within the contact arc, regardless of the extension by wear.
The links do not show any gliding on or of one’s teeth, which Special Chains posesses soft and practically noiseless gripping; this transmitting was also designed for transmitting power or higher speeds than this was allowed for roll chains.
The return of the “low noise chain” can amount 99% and for the full transfer from 96% to 97% under favourable conditions; of 94% upto 96% there exists a guarantee with smartly designed transmission under typical operating conditions.
The life time and maintenance of low noise chains depends mainly on the look of the entire chain drive, the strain arrangement included. At very loose chains the balancing of the chain will speed up the wear. An excellent tension arrangement can dual the lifetime. A slight clearance is necessary with a minimum of +/-3 mm. Although the chain is getting higher positioned on one’s teeth upon stretching of the pitch, this stretching is not moderated by the directly section of the chain, which means that this section is certainly slacking at wear.