The EP Greenhouse gear reduction motor gearbox is a concise and lightweight reduction gearbox with a limit switch system that is ideal for assembly of a locally available electric electric motor. The Gearbox is used in manually-managed or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-installEP Gearbox is usually rainproof and windproof. The Gearbox includes a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel tranny ensures that the drive shaft is definitely locked when the reduction gearbox isn’t running. The completely sealed reduction gearbox has an growth chamber with a diaphragm to keep carefully the gear essential oil at a low pressure under all circumstances, even at high temps. Thanks to the use of an expansion chamber, the Gearbox can be installed in any position. There are no limitations, since there is no dependence on a bleed plug. The sealed reduction gearbox keeps the gear essential oil of the Gearbox in optimal condition because of its entire operating lifetime. The Gearbox is ideal for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.
THE APPARATUS box reduction gearbox comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an included chamber and is definitely enclosed by an impact-resistant plastic cover. The limit change system is accessible and easy to adjust. The limit switch system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).