0 Items

Starting from these considerations, we have a gearbox with a electric motor mounting flange that’s separable from the housing which incorporate the essential oil seal; in this manner we avoid any risk of damaging the oil seal in the event of replacement of the insight flange and the O-Ring could be eliminated.
All the aside covers, swinging and with ft, have O-Rings instead of traditional flat gaskets.
The sizes 03-04-05 permit the worm gear unit rotation of your toes without disassembling them; furthermore the variations with swinging apart covers permit the lateral flanges to be installed on both sides with basic fixing screws.
The worm screw includes a ZI involute profile: with this worm-wheel coupling we shall get a better performance with a temperature reduction.
The gearboxes and motors are painted with RAL 9022 aluminium colour epoxy powder to safeguard the parts from oxidation and against micro-blowholes that can come during the pressure of die-castings.
The CHPC pre-stage gears (already present in the catalogue of CHM) can also be mounted with this range, obtaining a gear ratio up to at least one 1:300. For bigger reductions can be done to have two gears collectively using a proper kit